|
|
推荐阅读主题：示范课 主题来源：教育知识 http://www.91pth.com
/COM,ANSYS RELEASE 12.1 UP20091102 10:29:10 06/19/2011/COM,ANSYS RELEASE 12.1 UP20091102 10:31:10 06/19/2011
*** ERROR *** CP = 31.434 TIME= 10:53:22 Line 1 is attached to area 3, which is attached to an entity that is not to be moved. Command AGEN unable to be executed with the move option and this set of entities.
*** ERROR *** CP = 38.891 TIME= 10:57:36 Area 1 is attached to a volume and cannot be moved.
*** ERROR *** CP = 73.866 TIME= 11:19:38 Fillet is not possible.
*** ERROR *** CP = 73.929 TIME= 11:19:40 Fillet is not possible.
*** ERROR *** CP = 74.007 TIME= 11:19:41 Fillet is not possible.
*** ERROR *** CP = 74.085 TIME= 11:19:42 Fillet is not possible.
*** WARNING *** CP = 77.267 TIME= 11:22:06 Uelected area 19.
*** ERROR *** CP = 113.803 TIME= 12:10:40 Unknown select type of " 4 ". Select type should be S,R,A,U,ALL,INVERT,NONE, or STAT. The VSEL command is ignored.
*** WARNING *** CP = 113.912 TIME= 12:10:49 CPLOT is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored. /COM,ANSYS RELEASE 12.1 UP20091102 12:11:34 06/19/2011
*** ERROR *** CP = 31.138 TIME= 12:19:52 Starting number on the VSWEEP command must be positive.
*** WARNING *** CP = 61.152 TIME= 12:32:10 One of the neighboring volumes is meshed with quadratic elements. To obtain dropped midnodes at the interface, mesh the volumes with linear elements fit or use VSWEEP,ALL.
*** WARNING *** CP = 61.730 TIME= 12:32:31 One of the neighboring volumes is meshed with quadratic elements. To obtain dropped midnodes at the interface, mesh the volumes with linear elements fit or use VSWEEP,ALL.
*** WARNING *** CP = 62.822 TIME= 12:32:32 Shape testing revealed that 8 of the 17340 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command. /COM,ANSYS RELEASE 12.1 UP20091102 12:57:28 06/19/2011
*** WARNING *** CP = 22.761 TIME= 12:59:03 CPLOT is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 23.977 TIME= 13:00:11 Shape testing revealed that 8 of the 960 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command.
*** WARNING *** CP = 467.176 TIME= 13:22:38 Shape testing revealed that 2839 of the 381508 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command.
*** ERROR *** CP = 475.897 TIME= 13:29:36 Unknown expression in input line.
*** ERROR *** CP = 475.943 TIME= 13:29:39 The above error occurred processing field= 3+ Line= vsweep,3+
*** ERROR *** CP = 475.959 TIME= 13:29:41 Starting number on the VSWEEP command must be positive.
*** WARNING *** CP = 880.189 TIME= 13:41:43 User abort detected during volume sweeping. The VSWE command is ignored. (The log file for this session requires correction. Refer to Chapter 8 of the ANSYS Operatio Guide.).
*** FATAL *** CP = 1227.229 TIME= 13:51:16 An allocation was made with a negative length requested: -1567859872 Filename:..\src\FEM_smooth.c Linenum:2399. 咋会事？
************************************************************************ The above error is non-recoverable by ANSYS ANSYS run terminated by the indicated error Current data base saved if possible. ************************************************************************/COM,ANSYS RELEASE 12.1 UP20091102 13:54:58 06/19/2011
*** WARNING *** CP = 1.794 TIME= 13:56:42 LESIZE is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 1.841 TIME= 13:56:42 VSWEEP is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 1.903 TIME= 13:56:42 VSWEEP is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored. /COM,ANSYS RELEASE 12.1 UP20091102 14:29:02 06/19/2011
*** WARNING *** CP = 273.454 TIME= 20:25:40 User abort requested while storing nodes and elements. Aborting process would corrupt database. Process will continue.
*** ERROR *** CP = 331.221 TIME= 20:28:06 Internal error in the requested meshing operatio. Process aborted. (Reference: ..\src\FEM_swPath.cpp, line: 67) Please send the data leading to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program. 又是内部错误~
*** ERROR *** CP = 331.299 TIME= 20:28:11 An unexpected error ( SIG$SEGV ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. %>_<% Previously saved files are unaffected. /COM,ANSYS RELEASE 12.1 UP20091102 20:29:14 06/19/2011
*** ERROR *** CP = 476.365 TIME= 20:56:54 An unexpected error ( SIG$BREAK ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. %>_<% Previously saved files are unaffected. /COM,ANSYS RELEASE 12.1 UP20091102 20:57:47 06/19/2011
*** WARNING *** CP = 4.321 TIME= 20:58:27 Shape testing revealed that 8 of the 960 new or modified elements violate shape warning limits. To review test results, please see the output file or issue the CHECK command.
*** WARNING *** CP = 245.764 TIME= 21:10:08 An error has occurred while forming pyramids on volume 4 boundary. A nonconforming mesh without pyramid traitioning will be stored.
*** ERROR *** CP = 325.777 TIME= 21:10:59 An unexpected error ( SIG$BREAK ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. Previously saved files are unaffected. /COM,ANSYS RELEASE 12.1 UP20091102 21:11:56 06/19/2011
*** WARNING *** CP = 671.600 TIME= 21:30:59 Coefficient ratio exceeds 1.0e8 - Check results.
*** WARNING *** CP = 2153.297 TIME= 21:41:45 There are 4 small equation solver pivot terms. This may be a traitional effect caused by the Newton-Raphson logic.
*** ERROR *** CP = 4351.367 TIME= 16:08:46 An unexpected error ( SIG$BREAK ) has occurred... ANSYS internal data has been corrupted. ANSYS is unable to recover and will terminate. Previously saved files are unaffected. |
|
发表于 2016-5-31 17:57:28