电脑 还是代码的错
推荐阅读主题：示范课 主题来源：教育知识 http://www.91pth.com/COM,ANSYS RELEASE 12.1 UP20091102 10:29:10 06/19/2011/COM,ANSYS RELEASE 12.1 UP20091102 10:31:10 06/19/2011
*** ERROR *** CP = 31.434 TIME= 10:53:22 Line 1 is attached to area 3, which is attached to an entity that is not to be moved.Command AGEN unable to beexecuted with the move option and this set of entities.
*** ERROR *** CP = 38.891 TIME= 10:57:36 Area 1 is attached to a volume and cannot be moved.
*** ERROR *** CP = 73.866 TIME= 11:19:38 Fillet is not possible.
*** ERROR *** CP = 73.929 TIME= 11:19:40 Fillet is not possible.
*** ERROR *** CP = 74.007 TIME= 11:19:41 Fillet is not possible.
*** ERROR *** CP = 74.085 TIME= 11:19:42 Fillet is not possible.
*** WARNING *** CP = 77.267 TIME= 11:22:06 Uelected area 19.
*** ERROR *** CP =113.803 TIME= 12:10:40 Unknown select type of " 4 ". Select type should be S,R,A,U,ALL,INVERT,NONE, or STAT. The VSEL command is ignored.
*** WARNING *** CP =113.912 TIME= 12:10:49 CPLOT is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored. /COM,ANSYS RELEASE 12.1 UP20091102 12:11:34 06/19/2011
*** ERROR *** CP = 31.138 TIME= 12:19:52 Starting number on the VSWEEP command must be positive.
*** WARNING *** CP = 61.152 TIME= 12:32:10 One of the neighboring volumes is meshed with quadratic elements.To obtain dropped midnodes at the interface, mesh the volumes with linear elements fit or use VSWEEP,ALL.
*** WARNING *** CP = 61.730 TIME= 12:32:31 One of the neighboring volumes is meshed with quadratic elements.To obtain dropped midnodes at the interface, mesh the volumes with linear elements fit or use VSWEEP,ALL.
*** WARNING *** CP = 62.822 TIME= 12:32:32 Shape testing revealed that 8 of the 17340 new or modified elements violate shape warning limits.To review test results, please see the output file or issue the CHECK command./COM,ANSYS RELEASE 12.1 UP20091102 12:57:28 06/19/2011
*** WARNING *** CP = 22.761 TIME= 12:59:03 CPLOT is not a recognized PREP7 command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 23.977 TIME= 13:00:11 Shape testing revealed that 8 of the 960 new or modified elements violate shape warning limits.To review test results, please see the output file or issue the CHECK command.
*** WARNING *** CP =467.176 TIME= 13:22:38 Shape testing revealed that 2839 of the 381508 new or modified elementsviolate shape warning limits.To review test results, please see the output file or issue the CHECK command.
*** ERROR *** CP =475.897 TIME= 13:29:36 Unknown expression in input line.
*** ERROR *** CP =475.943 TIME= 13:29:39 The above error occurred processing field= 3+Line= vsweep,3+
*** ERROR *** CP =475.959 TIME= 13:29:41 Starting number on the VSWEEP command must be positive.
*** WARNING *** CP =880.189 TIME= 13:41:43 User abort detected during volume sweeping.The VSWE command isignored.(The log file for this session requires correction.Referto Chapter 8 of the ANSYS Operatio Guide.).
*** FATAL *** CP = 1227.229 TIME= 13:51:16 An allocation was made with a negative length requested: -1567859872Filename:..\src\FEM_smooth.c Linenum:2399. 咋会事？
************************************************************************ The above error is non-recoverable by ANSYS ANSYS run terminated by the indicated error Current data base saved if possible. ************************************************************************/COM,ANSYS RELEASE 12.1 UP20091102 13:54:58 06/19/2011
*** WARNING *** CP = 1.794 TIME= 13:56:42 LESIZE is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 1.841 TIME= 13:56:42 VSWEEP is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored.
*** WARNING *** CP = 1.903 TIME= 13:56:42 VSWEEP is not a recognized BEGIN command, abbreviation, or macro. This command will be ignored./COM,ANSYS RELEASE 12.1 UP20091102 14:29:02 06/19/2011
*** WARNING *** CP =273.454 TIME= 20:25:40 User abort requested while storing nodes and elements.Abortingprocess would corrupt database.Process will continue.
*** ERROR *** CP =331.221 TIME= 20:28:06 Internal error in the requested meshing operatio.Process aborted. (Reference: ..\src\FEM_swPath.cpp, line: 67) Please send the data leading to this operation to your technical support provider, as this will allow ANSYS, Inc to improve the program. 又是内部错误~
*** ERROR *** CP =331.299 TIME= 20:28:11 An unexpected error ( SIG$SEGV ) has occurred...ANSYS internal data has been corrupted.ANSYS is unable to recover and will terminate.%>_<% Previously saved files are unaffected./COM,ANSYS RELEASE 12.1 UP20091102 20:29:14 06/19/2011
*** ERROR *** CP =476.365 TIME= 20:56:54 An unexpected error ( SIG$BREAK ) has occurred...ANSYS internal data has been corrupted.ANSYS is unable to recover and will terminate.%>_<% Previously saved files are unaffected./COM,ANSYS RELEASE 12.1 UP20091102 20:57:47 06/19/2011
*** WARNING *** CP = 4.321 TIME= 20:58:27 Shape testing revealed that 8 of the 960 new or modified elements violate shape warning limits.To review test results, please see the output file or issue the CHECK command.
*** WARNING *** CP =245.764 TIME= 21:10:08 An error has occurred while forming pyramids on volume 4 boundary.A nonconforming mesh without pyramid traitioning will be stored.
*** ERROR *** CP =325.777 TIME= 21:10:59 An unexpected error ( SIG$BREAK ) has occurred...ANSYS internal data has been corrupted.ANSYS is unable to recover and will terminate. Previously saved files are unaffected./COM,ANSYS RELEASE 12.1 UP20091102 21:11:56 06/19/2011
*** WARNING *** CP =671.600 TIME= 21:30:59 Coefficient ratio exceeds 1.0e8 - Check results.
*** WARNING *** CP = 2153.297 TIME= 21:41:45 There are 4 small equation solver pivot terms.This may be atraitional effect caused by the Newton-Raphson logic.
*** ERROR *** CP = 4351.367 TIME= 16:08:46 An unexpected error ( SIG$BREAK ) has occurred...ANSYS internal data has been corrupted.ANSYS is unable to recover and will terminate. Previously saved files are unaffected.
页:
[1]